Rennline Pedals and DiamondMats for the MINI

Building out the MINI trackcar, we’ve been trying to balance weight savings, safety, and utility. We removed most of the interior trim, but decided to keep the panel that runs along the bottom of the door jam to the fuse panel (called “trim panel leg room”) to protect the fuse panel as well as the wire bundle that runs along the door.

Once you remove the carpet, you’ll realize that the floor beneath the pedals is quite uneven. To fix that, we filled the voids and leveled the floor with closed-cell foam and bolted plywood to the chassis. To improve heel-toe downshifts we added a set of Rennline pedals like we have in the GeorgeCo Porsche. The pedals are fairly straight-forward to install. (The accelerator pedal is easier to install if you remove the accelerator module first.)

We finished it off with a set of DiamondMats that will be bolted to the plywood as well.

carpetremoved-1 plywood finished

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Captcha loading...